AFC-W410 MINISEP KIT PICTURED ABOVE

What you see is all the pieces parts that come with a typical MiniSep kit from Airwolf.
This exact kit fits aircraft with 3/4" engine breather lines.

You get everything you need to install on the aircraft. Here are some of the particulars.
Black MiniSep can is epoxy powdercoated inside and out. Inlets and outlets are beaded.
FYI we have a $40,000 PHI 3CPV tube finishing machine to put the beads on these parts. We do it so the hose will not slip off the tube. That is the reason there is a MIL standard.. The military
figured out 60 yrs ago that without these beads, oily hoses can slip off aluminum tubing.
All the hoses, including the orange hi-temp SCAT tubing are cut to length.
All the clamps, [stainless steel of course],  are there.
The return fittings, reducer bushing and 90 degree fittings are there
The Adel clamps are there
All the nuts, screws, washers are there.
As you can see, you get a pile of parts in the this kit for the $399 price. We are not like the competition who says to just have your mechanic build and or purchase all the parts needed for the installation like it is no big deal. It is a big deal to get all the parts in the box and it is a bigger deal not to have to spend $75/hr for your mechanic to make parts.

Note: The typical place to drain the oil back into the engine on a Lyc engine is the lower